Screen Printing vs. Embroidery vs. DTF vs. DTG vs. Laser Engraving
By Bailey McGraw, Co-founder, CCB Imprint · Last updated
Short answer: Choose embroidery for polos, jackets, hats, and bags where you want a stitched, premium look. Choose screen printing for larger runs of T-shirts and hoodies with a bold logo in a few solid colors. Choose direct-to-film (DTF) for full-color artwork at any quantity on almost any fabric. Choose direct-to-garment (DTG) for photographic prints on small runs of cotton. Choose laser engraving for drinkware, awards, and metal goods. CCB Imprint runs all five methods in its own shop in Minnesota and recommends one based on your artwork, product, and quantity.
How do the five decoration methods compare?
| Method | How it works | Best for | Colors | Typical limits |
|---|---|---|---|---|
| Embroidery | Thread is stitched into the fabric from a digitized file | Polos, jackets, fleece, hats, bags | Solid thread colors | Tiny text, gradients, and photos do not reproduce well |
| Screen printing | Ink is pressed through a mesh screen, one screen per color | T-shirts, hoodies, totes in larger quantities | Solid spot colors, closest brand color matching | Each added color adds setup, so small runs and many colors cost more |
| Direct-to-film (DTF) | Design is printed on film, then heat-pressed onto the garment | Full-color logos on cotton, polyester, and blends, at any quantity | Full color | Large solid areas have a slightly heavier feel than screen print |
| Direct-to-garment (DTG) | An inkjet printer applies ink straight onto the fabric | Photographic or highly detailed art on small runs | Full color | Works best on cotton |
| Laser engraving | A laser marks the surface or removes a coating | Stainless drinkware, awards, metal and coated hard goods | Single tone, set by the material underneath | No color printing |
When should you choose embroidery?
Choose embroidery when the garment is structured or textured and the logo is simple. A stitched logo on a polo, quarter-zip, soft shell, or cap holds up to years of washing and reads as higher-end than print.
Embroidery suits left-chest logos, cap fronts, sleeves, and bag panels. It is a poor fit for photographs, color gradients, and very small lettering, because each detail has to be formed by thread. Thread colors are matched by eye to the closest available shade.
When should you choose screen printing?
Choose screen printing for bold graphics on soft goods when you are ordering in quantity. Each color in the design needs its own screen, so setup work is the same for 24 shirts or 500. That makes screen printing more economical as the order grows.
Screen printing offers the most precise color control of any method. If your brand has a Pantone (PMS) color, share the number. Screen printing held about 56% of the global custom T-shirt printing market in 2024, according to Grand View Research.
When should you choose DTF?
Choose DTF when your artwork has many colors, fine detail, or gradients, or when you need a small quantity. DTF has no per-color setup, which is why it works for a single piece as well as for hundreds. It adheres to cotton, polyester, and blends, so one design can go on tees, performance wear, and bags.
DTF is the reason a store can offer full-color logos with no minimum order.
When should you choose DTG?
Choose DTG for photographic or painterly artwork on cotton garments in small runs. The ink soaks into the fibers, so the print feels soft. DTG is slower per piece than screen printing, which is why it is used mainly for short runs.
When should you choose laser engraving?
Choose laser engraving for hard goods. On powder-coated stainless steel tumblers and bottles, the laser removes the coating to reveal the steel beneath. The mark is permanent and will not peel or wash off. Engraving is one tone, so it suits logos that work in a single color. YETI, Frost Buddy, and Polar Camel drinkware at CCB Imprint are engraved.
Which method fits which product?
| Product | Usual method | Alternative |
|---|---|---|
| T-shirts | Screen print or DTF | DTG for photo art on cotton |
| Hoodies and sweatshirts | Screen print or DTF | Embroidery for a small chest logo |
| Polos | Embroidery | DTF for full-color logos |
| Jackets, vests, and fleece | Embroidery | DTF on smooth shells |
| Caps and beanies | Embroidery | DTF on cap fronts |
| Tote bags and backpacks | Print or embroidery | Depends on fabric |
| Stainless tumblers and bottles | Laser engraving | Full-color print on select items |
| Awards | Laser engraving | None |
How big can a logo be?
Standard imprint areas listed on CCB Imprint product pages:
| Placement | Maximum size (inches) |
|---|---|
| Left chest | 3.5 x 3.5 |
| Full front (T-shirt) | 12 wide x 14 tall |
| Full back (T-shirt) | 14 wide x 16 tall |
| Back (polo) | 10 x 10 |
| Sleeve | 3 x 3 |
| Cap front | 4 wide x 2.25 tall |
| Cap side | 2.5 wide x 1.5 tall |
| Tote bag center | 8 x 8 |
| Drinkware, single side | 2.5 wide x 3 tall |
What file should you send?
Vector files work best: AI, EPS, or PDF. A high-resolution PNG at 300 dpi or higher is fine for most uses. If your file is not print-ready, CCB Imprint's art team can work with what you have or quote a recreation. Approved artwork is kept on file for reorders.
Every decorated order gets a free digital proof before production.
Does the decoration method change the price?
Yes, along with the product and the quantity. The 2026 CCB Imprint Price Index found that ordering 50 pieces instead of 1 lowers the median per-piece price by 34.8% across 64 products, with one logo included. See real prices by quantity.
Which products get seen the most?
If visibility is the goal, the product matters as much as the method. In the ASI 2026 Ad Impressions Study, promotional fleece and jackets generated about 9,000 lifetime impressions, bags 4,900, caps 4,000, T-shirts 3,500, and polos 2,900. More figures: Promotional Products and Custom Apparel Statistics.
Frequently asked questions
Is embroidery or screen printing better?
Neither is better overall. Embroidery is better for polos, jackets, and hats. Screen printing is better for larger runs of T-shirts and hoodies with bold, solid-color designs.
What is the difference between DTF and DTG?
DTF prints the design onto a film that is heat-pressed onto the garment and works on almost any fabric. DTG prints ink directly into the fabric and works best on cotton.
Which decoration method lasts the longest?
Embroidery and laser engraving are the most permanent, because the logo is stitched into the fabric or marked into the surface. Quality screen printing and DTF also hold up through many washes when cared for properly.
Can you match my exact brand color?
Screen printing gives the closest match to a Pantone (PMS) color. Embroidery thread and heat transfers are matched to the closest available shade.
What decoration methods does CCB Imprint offer?
CCB Imprint offers embroidery, screen printing, direct-to-film (DTF), direct-to-garment (DTG), and laser engraving, all done in its own shop in Minnesota.
Not sure which to pick?
Call (855) 458-0381 with your artwork, product, and quantity, and CCB Imprint will recommend a method.
